Specification Sheet

Saf-T Vent
®
EZ Seal
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
SINGLE WALL AL 29-4C
®
SPECIAL GAS VENT
11
Heatfab
90° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for each elbow is equivalent to 10 feet of vent for 3 and 4 inch diameters and
15 feet for 5 through 16 inch diameters.
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E
Nominal Rise Run Combined Offset
Diameter Installed Height
9314 3 4.9 4.9 9.8 9.8
9314LR 3 7.1 6.5 13.5 13.5
9414 4 6.6 5.7 12.8 12.8
9414LR 4 10.0 8.3 18.3 18.3
9514 5 10.5 8.8 19.3 19.3
9514TR 5 8.26 6.26 14.4 14.4
9614 6 11.0 9.3 20.3 20.3
9614TR 6 7.0 6.24 13.3 13.3
9714 7 11.5 9.8 21.3 21.3
9714TR 7 8.8 8.3 17.1 17.1
9814 8 12.0 10.3 22.3 22.3
9814TR 8 9.3 8.8 18.1 18.1
9914 9 12.5 10.8 23.3 23.3
9914TR 9 9.8 9.3 19.1 19.1
91014 10 15.0 13.3 28.5 28.5
91014TR 10 11.8 9.8 21.5 21.5
91214 12 16.0 14.5 30.5 30.5
91414 14 17.0 15.5 32.5 32.5
91614 16 18.0 16.5 34.5 34.5
Elbows:
90° Elbow
C
B
A
90°
E
D