Specification Sheet

Saf-T Vent
®
EZ Seal
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
SINGLE WALL AL 29-4C
®
SPECIAL GAS VENT
3
Heatfab
Horizontal/Vertical In-Line Drain Section — Use to drain away condensate from the vent system. The
unique design of this part allows it to be installed in a horizontal, vertical or inclined orientation. Continuous horizontal runs in
excess of 30 feet require a condensate drain. High temperature silicone rubber tubing is available separately, see below.
In-Line Drain Section
Accessories:
Part Number DIM - A DIM - B DIM - C DIM - D
Nominal Installed Drain Drain
Diameter Length Location Diameter (OD)
9321 3 7.5 3 0.5
9421 4 7.4 3 0.5
A
B
C
D
Part Number DIM - A DIM - B DIM - C DIM - D
Nominal Installed Drain Drain
Diameter Length Location Diameter (OD)
9521 5 7.3 4 0.5
9621 6 7.3 4 0.5
9721 7 7.3 4 0.5
9821 8 7.3 4 0.5
9921 9 7.3 4 0.5
91021 10 7.3 4 0.5
91221 12 7.3 4 0.5
91421 14 7.3 4 0.5
91621 16 7.3 4 0.5
Condensate Drain Tube Kit — This kit contains a length of high temperature silicone rubber tubing, a clamp, and
two cable ties. The silicone tubing is rated for 500°F, and is translucent to allow inspection of the P-trap. Larger diameter drains
can be plumbed directly into a drain system.
Part Number: 7000TUBE 5 feet of 3/8" diameter tubing
7000TUBE-10 10 feet of 3/8" diameter tubing
7001TUBE 10 feet of 1/2" diameter tubing