Installation Guide

23
APPLICATION 4. Support Horizontally (Figure 8).
Support horizontally by attaching guy wires, chains or threaded rod to the guy support bracket holes.
Anchor the guy lines to the building infrastructure on the underside of the floor or roof.
Figure 7
Guy Support
Guy Line
Floor or Roof
1/4" Pitch per Foot
Used mainly as a support between floors.
Can also be used inside an accessible chase with addition of site designed support brackets
Saf-T Vent CI Plus Floor Support:
• Loosen or remove bolts from support band.
• Place support band around or over vent pipe.
The flat flange on support gussets must contact
floor surface.
• Secure the support band around vent pipe with
hardware, overtightening could damage vent pipe.
• Attach the support band to the floor through flange
on gussets, if required.
FLSUP06 6 14.68 11.68
FLSUP07 7 15.68 12.68
FLSUP08 8 16.68 13.68
FLSUP09 9 17.68 14.68
FLSUP10 10 18.68 15.68
FLSUP11 11 19.68 16.68
FLSUP12 12 20.67 17.67
FLSUP14 14 22.68 19.68
FLSUP16 16 24.68 21.68
FLSUP18 18 26.68 23.68
FLSUP20 20 28.68 25.68
FLSUP22 22 30.68 27.68
FLSUP24 24 32.68 29.68
FLSUP26 26 34.68 31.68
FLSUP28 28 36.68 33.68
FLSUP30 30 38.68 35.68
FLSUP32 32 40.68 37.68
P
ART NO. DIM. A DIM. B DIM. C
Refer to Dimension “C” on Chart
For Maximum Size of Floor Opening