Specification Sheet

8
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Part Number DIM - A Vent DIM - B DIM - C
Hole Outer Jacket Plate Plate
Diameter Diameter Length Width
CCS04FS 6.4 6.3 20 20
CCS05FS 7.4 7.3 20 20
CCS06FS 8.4 8.3 20 20
CCS07FS 9.4 9.3 26 26
CCS08FS 10.4 10.3 26 26
CCS09FS 11.4 11.3 26 26
CCS10FS 12.4 12.3 26 26
CCS12FS 14.4 14.3 26 26
CCS14FS 16.4 16.3 26 26
CCS16FS 18.4 18.3 26 26
CCS18FS 20.4 20.3 32 32
CCS20FS 22.4 22.3 32 32
CCS22FS 24.4 24.3 32 32
CCS24FS 26.4 26.3 32 32
CCS26FS 28.4 28.3 36 36
CCS28FS 30.4 30.3 36 36
CCS30FS 32.4 32.3 40 40
CCS32FS 34.4 34.3 40 40
Fire Stop —
A firestop may be required anytime Saf-T Vent CI Plus penetrates combustible floors, walls, or ceilings.
Remove any insulating material from the floor, wall or ceiling cavity for at least 1" around the vent for diameters 4" - 24" and
2" around the vent for diameters 26" - 32". Review fire codes and consult with local building code officials to determine the
necessity for a firestop. The stainless steel firestop may be trimmed provided the required clearances are maintained.
Fire Stop
Accessories:
A
B
C
Side View
Clearance Spacer
Condensate Drain Tube Kit — This kit contains a length of high temperature silicone rubber tubing, a clamp,
and two cable ties. The silicone tubing is rated for 500°F, and is translucent to allow inspection of the P-trap. Larger diameter
drains can be plumbed directly into a drain system.
Part Number: 7000TUBE 5 feet of 3/8” diameter tubing
7000TUBE-10 10 feet of 3/8” diameter tubing
7001TUBE 10 feet of 1/2” diameter tubing