Specification Sheet

9
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Accessories:
In-Line Damper Section — Use to adjust the flow in positive pressure applications. Can also be used to restrict
back flow when the appliance is off. Each damper comes with an 18" long coupler, a locking strap, a rotating clamp, and a
motor platform. The shaft is 3/8" diameter.
10.5
INSTALLED
LENGTH
A
B
Part Number DIM - A DIM - B
Nominal Nominal Diameter
Inner Diameter Outer Jacket
CCA04DMP 4 6.3
CCA05DMP 5 7.3
CCA06DMP 6 8.3
CCA07DMP 7 9.3
CCA08DMP 8 10.3
CCA09DMP 9 11.3
CCA10DMP 10 12.3
CCA12DMP 12 14.3
CCA14DMP 14 16.3
CCA16DMP 16 18.3
CCA18DMP 18 20.3
Vent Flow Regulator —
Use only in conjuction with an in-line or termination fan to balance the flow of the exhaust
gases when inducing a draft.
Part Number DIM - A
Nominal
Inner Diameter
CCA04BG 4
CCA05BG 5
CCA06BG 6
CCA07BG 7
CCA08BG 8
CCA09BG 9
CCA10BG 10
CCA12BG 12
CCA14BG 14
A
4"
INSTALLED
LENGTH
Vent Flow Regulator
LOCKING
BOLT
SLIDE
PLATE
Side View Top View