Specification Sheet

11
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
A
C
D
B
Accessories:
Horizontal/Vertical In-Line Drain Section — Use to drain away condensate from the vent system. The
unique design of this part allows it to be installed in a horizontal, vertical or inclined orientation. Continuous horizontal runs in
excess of 30 feet require a condensate drain. High temperature silicone tubing is available separately. The outer jacket consists
of an 12" long coupler made of 430 stainless steel with an outlet for the drain and also comes standard with a locking strap and
a rotating clamp.
Part Number DIM - A DIM - B DIM - C DIM - D
Nominal Diameter Nominal Diameter Installed Drain
Inner Diameter Outer Jacket Length Diameter OD
CCA04DRN 4 6.3 4.5 0.5
CCA05DRN 5 7.3 4.5 0.5
CCA06DRN 6 8.3 4.5 0.5
CCA07DRN 7 9.3 4.5 0.5
CCA08DRN 8 10.3 4.5 0.5
CCA09DRN 9 11.3 4.5 0.5
CCA10DRN 10 12.3 4.5 0.5
CCA12DRN 12 14.3 4.5 0.5
CCA14DRN 14 16.3 4.5 0.5
CCA16DRN 16 18.3 4.5 0.5
CCA18DRN 18 20.3 4.5 0.5
CCA20DRN 20 22.3 4.5 0.5
CCA22DRN 22 24.3 4.5 0.5
CCA24DRN 24 26.3 4.5 0.5
CCA26DRN 26 28.3 4.5 0.5
CCA28DRN 28 30.3 4.5 0.5
CCA30DRN 30 32.3 4.5 0.5
CCA32DRN 32 34.3 4.5 0.5
Coupler (included)
In-Line Drain Section
Drain Tube Kit (sold separately)