Specification Sheet

13
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
C
B
A
Tee Cover— Use to cap off the male end of a Boot Tee body that is installed horizontally. The tee cover / boot tee
combination allows for the future addition of appliances to a common-vent system. The cover comes with a locking strap and
a finish coupler that is made of the same 430 stainless steel as the outer jacket to give a finished look to the installation.
Part Number DIM - A DIM - B DIM - C
Nominal Nominal Diameter Height
Inner Diameter Outer Jacket
CCA04CV 4 6.3 1.62
CCA05CV 5 7.3 1.62
CCA06CV 6 8.3 1.62
CCA07CV 7 9.3 1.62
CCA08CV 8 10.3 1.62
CCA09CV 9 11.3 1.62
CCA10CV 10 12.3 1.62
CCA12CV 12 14.3 1.62
CCA14CV 14 16.3 1.62
CCA16CV 16 18.3 1.62
CCA18CV 18 20.3 1.62
CCA20CV 20 22.3 1.62
CCA22CV 22 24.3 1.62
CCA24CV 24 26.3 1.62
CCA26CV 26 28.3 1.62
CCA28CV 28 30.3 1.62
CCA30CV 30 32.3 1.62
CCA32CV 32 34.3 1.62
Boot Tees & Covers:
Cover
Coupler
Locking Band