Specification Sheet

18
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Part Number DIM - A DIM - B DIM - C
Inlet Diameter Outlet Diameter Installed Length
CCA04NCR06 4 6 10.5
CCA05NCR07 5 7 10.5
CCA06NCR08 6 8 10.5
CCA07NCR09 7 9 10.5
CCA08NCR10 8 10 10.5
CCA09NCR10 9 10 10.5
CCA10NCR12 10 12 10.5
CCA12NCR14 12 14 10.5
CCA14NCR16 14 16 10.5
CCA16NCR18 16 18 10.5
CCA18NCR20 18 20 10.5
CCA20NCR22 20 22 10.5
CCA22NCR24 22 24 10.5
CCA24NCR26 24 26 10.5
CCA26NCR28 26 28 10.5
CCA28NCR30 28 30 10.5
CCA30NCR32 30 32 10.5
Increasers:
Increaser — Use to upsize a vent system. The term “increaser” is based on an increase in vent diameter in the direction
of flue gas motion. Increasers are eccentric to allow for proper drainage of condensate when installed horizontally. Each
increaser comes standard with a coupler that will fit the outlet diameter. Other diameter configurations may be available; please
contact Heat-fab’s Engineering Team to discuss your special needs.
Increaser
C
A
B