Specification Sheet

20
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
15° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for this fitting is equivalent to 3 feet of horizontal vent. The inlet connection rotates
to accommodate direction changes. Each elbow comes standard with a coupler, joint locking strap, and a rotating clamp.
Elbows:
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM - F
Nominal Nominal Rise Run Combined Offset
Diameter Diameter Installed Height
Inner vent Outer Jacket
CCA04E15 4 6.3 4.3 4.43 16.7 2.3
CCA05E15 5 7.3 4.4 4.4 16.9 2.3
CCA06E15 6 8.3 4.4 4.4 17.2 2.3
CCA07E15 7 9.3 4.5 4.5 17.5 2.3
CCA08E15 8 10.3 4.5 4.5 17.8 2.4
CCA09E15 9 11.3 4.6 4.6 18.1 2.4
CCA10E15 10 12.3 4.7 4.7 18.3 2.4
CCA12E15 12 14.3 4.8 4.8 18.8 2.5
CCA14E15 14 16.3 4.9 4.9 19.3 2.6
CCA16E15 16 18.3 5.0 5.0 19.9 2.6
CCA18E15 18 20.3 5.2 5.2 20.4 2.7
CCA20E15 20 22.3 5.3 5.3 20.9 2.8
CCA22E15 22 24.3 5.4 5.4 21.4 2.8
CCA24E15 24 26.3 5.6 5.6 21.9 2.9
CCA26E15 26 28.3 5.7 5.7 22.5 3.0
CCA28E15 28 30.3 5.8 5.8 23.0 3.1
CCA30E15 30 32.3 6.0 6.0 23.5 3.1
CCA32E15 32 34.3 6.1 6.1 24.0 3.2
A
B
C
D
15°
F
E