Specification Sheet

21
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
30° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for this fitting is equivalent to 5 feet of horizontal vent. The inlet connection rotates
to accommodate direction changes. Each elbow comes standard with a coupler, joint locking strap, and a rotating clamp.
Elbows:
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM - F
Nominal Nominal Rise Run Combined Offset
Diameter Diameter Installed Height
Inner vent Outer Jacket
CCA04E30 4 6.3 4.3 4.8 17 4.5
CCA05E30 5 7.3 4.4 5.0 17.3 4.6
CCA06E30 6 8.3 4.5 5.1 18 4.8
CCA07E30 7 9.3 4.7 5.2 18.3 5.0
CCA08E30 8 10.3 4.8 5.3 19 5.0
CCA09E30 9 11.3 4.9 5.5 19.3 5.2
CCA10E30 10 12.3 5.0 5.6 20 5.3
CCA12E30 12 14.3 5.3 5.9 21 5.6
CCA14E30 14 16.3 5.6 6.1 22 5.9
CCA16E30 16 18.3 5.8 6.4 23 6.1
CCA18E30 18 20.3 6.1 6.7 24 6.4
CCA20E30 20 22.3 6.4 7.0 25 6.7
CCA22E30 22 24.3 6.6 7.2 26 7.0
CCA24E30 24 26.3 6.9 7.5 27 7.2
CCA26E30 26 28.3 7.2 7.8 28 7.5
CCA28E30 28 30.3 7.4 8.0 29 7.7
CCA30E30 30 32.3 7.7 8.3 30 8.0
CCA32E30
32 34.3 8.0 8.6 31 8.3
C
D
B
A
30°
E
F