Specification Sheet

22
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
45° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for this fitting is equivalent to 8 feet of horizontal vent. The inlet connection rotates
to accommodate direction changes. Each elbow comes standard with a coupler, joint locking strap, and a rotating clamp.
Elbows:
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM - F
Nominal Nominal Rise Run Combined Offset
Diameter Diameter Installed Height
Inner vent Outer Jacket
CCA04E45 4 6.3 6.2 6.7 22.1 9.2
CCA05E45 5 7.3 6.4 7.0 23.3 9.4
CCA06E45 6 8.3 6.6 7.2 23.6 9.7
CCA07E45 7 9.3 6.8 7.4 24.3 10.0
CCA08E45 8 10.3 7.0 7.6 24.9 10.3
CCA09E45 9 11.3 7.2 7.8 25.2 10.6
CCA10E45 10 12.3 7.4 8.0 26.5 10.9
CCA12E45 12 14.3 7.8 8.4 27.7 11.6
CCA14E45 14 16.3 8.0 8.8 29.0 12.0
CCA16E45 16 18.3 8.7 9.3 30.4 12.6
CCA18E45 18 20.3 9.1 9.7 32.0 13.3
CCA20E45 20 22.3 9.5 10.1 33.3 13.8
CCA22E45 22 24.3 9.9 10.5 34.8 14.4
CCA24E45 24 26.3 10.3 10.9 36.3 15.1
CCA26E45 26 28.3 11.1 11.1 37.5 15.6
CCA28E45 28 30.3 11.2 11.7 39.1 16.2
CCA30E45 30 32.3 11.6 12.1 40.4 16.8
CCA32E45
32 34.3 12.0 12.6 41.9 17.3
A
B
D
C
E
F
45°