Specification Sheet

24
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Tight Radius 90° Elbow— Use to achieve offsets or changes in the direction of the vent system where a
conventional long radius 90 degree elbow will not fit. The degree of these welded seam elbows is not adjustable. The
pressure drop for this fitting is equivalent to 15 feet of horizontal vent. The inlet connection rotates to accommodate direction
changes. Each elbow comes standard with a coupler, joint locking strap, and a rotating clamp.
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM - F
Nominal Nominal Rise Run Combined Offset
Diameter Diameter Installed Height
Inner vent Outer Jacket
CCA04E90TR 4 6.3 7.3 6.8 14 14
CCA05E90TR 5 7.3 7.8 7.5 15 15
CCA06E90TR 6 8.3 8.3 7.8 16 16
CCA07E90TR 7 9.3 8.8 8.3 17 17
CCA08E90TR 8 10.3 9.3 8.8 18 18
CCA09E90TR 9 11.3 9.8 9.3 19 19
CCA10E90TR 10 12.3 10.3 9.8 20 20
Elbows:
F
E
C
D
A
B
90°