Specification Sheet

25
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Horizontal and Vertical —When used horizontally, install vent with a continuous pitch of 1/4" per foot, sloping
upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate
support to a Saf-T Vent CI Plus system, refer to installation instructions for support specifications. Each section comes with a
coupler and a joint locking strap.
Straight Lengths:
A
B
C
6" Length
Part Number DIM - A DIM - B DIM - C
Nominal Nominal Installed Length
Vent Pipe Outer Jacket
Diameter Diameter
CCA04L6 4 6.3 4.5
CCA05L6 5 7.3 4.5
CCA06L6 6 8.3 4.5
CCA07L6 7 9.3 4.5
CCA08L6 8 10.3 4.5
CCA09L6 9 11.3 4.5
CCA10L6 10 12.3 4.5
CCA12L6 12 14.3 4.5
CCA14L6 14 16.3 4.5
CCA16L6 16 18.3 4.5
CCA18L6 18 20.3 4.5
CCA20L6 20 22.3 4.5
CCA22L6 22 24.3 4.5
CCA24L6 24 26.3 4.5
CCA26L6 26 28.3 4.5
CCA28L6 28 30.3 4.5
CCA30L6 30 32.3 4.5
CCA32L6 32 34.3 4.5
9" Length
CCA04L9 4 6.3 7.5
CCA05L9 5 7.3 7.5
CCA06L9 6 8.3 7.5
CCA07L9 7 9.3 7.5
CCA08L9 8 10.3 7.5
CCA09L9 9 11.3 7.5
CCA10L9 10 12.3 7.5
CCA12L9 12 14.3 7.5
CCA14L9 14 16.3 7.5
CCA16L9 16 18.3 7.5
CCA18L9 18 20.3 7.5
CCA20L9 20 22.3 7.5
CCA22L9 22 24.3 7.5
CCA24L9 24 26.3 7.5
CCA26L9 26 28.3 7.5
CCA28L9 28 30.3 7.5
CCA30L9 30 32.3 7.5
CCA32L9 32 34.3 7.5