Specification Sheet

26
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Horizontal and Vertical —When used horizontally, install vent with a continuous pitch of 1/4" per foot, sloping
upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate
support to a Saf-T Vent CI Plus system, refer to installation instructions for support specifications. Each section comes with a
coupler and a joint locking strap.
Straight Lengths:
A
B
C
18" Length
CCA04L18 4 6.3 16.5
CCA05L18 5 7.3 16.5
CCA06L18 6 8.3 16.5
CCA07L18 7 9.3 16.5
CCA08L18 8 10.3 16.5
CCA09L18 9 11.3 16.5
CCA10L18 10 12.3 16.5
CCA12L18 12 14.3 16.5
CCA14L18 14 16.3 16.5
CCA16L18 16 18.3 16.5
CCA18L18 18 20.3 16.5
CCA20L18 20 22.3 16.5
CCA22L18 22 24.3 16.5
CCA24L18 24 26.3 16.5
CCA26L18 26 28.3 16.5
CCA28L18 28 30.3 16.5
CCA30L18 30 32.3 16.5
CCA32L18 32 34.3 16.5
12" Length
Part Number DIM - A DIM - B DIM - C
Nominal Nominal Installed Length
Vent Pipe Outer Jacket
Diameter Diameter
CCA04L12 4 6.3 10.5
CCA05L12 5 7.3 10.5
CCA06L12 6 8.3 10.5
CCA07L12 7 9.3 10.5
CCA08L12 8 10.3 10.5
CCA09L12 9 11.3 10.5
CCA10L12 10 12.3 10.5
CCA12L12 12 14.3 10.5
CCA14L12 14 16.3 10.5
CCA16L12 16 18.3 10.5
CCA18L12 18 20.3 10.5
CCA20L12 20 22.3 10.5
CCA22L12 22 24.3 10.5
CCA24L12 24 26.3 10.5
CCA26L12 26 28.3 10.5
CCA28L12 28 30.3 10.5
CCA30L12 30 32.3 10.5
CCA32L12 32 34.3 10.5