Specification Sheet

27
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Horizontal and Vertical —When used horizontally, install vent with a continuous pitch of 1/4" per foot, sloping
upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate
support to a Saf-T Vent CI Plus system, refer to installation instructions for support specifications. Each section comes with a
coupler and a joint locking strap.
Straight Lengths:
36" Length
CCA04L36 4 6.3 36.0
CCA05L36 5 7.3 36.0
CCA06L36 6 8.3 36.0
CCA07L36 7 9.3 36.0
CCA08L36 8 10.3 36.0
CCA09L36 9 11.3 36.0
CCA10L36 10 12.3 34.5
CCA12L36 12 14.3 34.5
CCA14L36 14 16.3 34.5
CCA16L36 16 18.3 34.5
CCA18L36 18 20.3 34.5
CCA20L36 20 22.3 34.5
CCA22L36 22 24.3 34.5
CCA24L36 24 26.3 34.5
CCA26L36 26 28.3 34.5
CCA28L36 28 30.3 34.5
CCA30L36 30 32.3 34.5
CCA32L36 32 34.3 34.5
A
B
C
24" Length
Part Number DIM - A DIM - B DIM - C
Nominal Nominal Installed Length
Vent Pipe Outer Jacket
Diameter Diameter
CCA04L24 4 6.3 22.5
CCA05L24 5 7.3 22.5
CCA06L24 6 8.3 22.5
CCA07L24 7 9.3 22.5
CCA08L24 8 10.3 22.5
CCA09L24 9 11.3 22.5
CCA10L24 10 12.3 22.5
CCA12L24 12 14.3 22.5
CCA14L24 14 16.3 22.5
CCA16L24 16 18.3 22.5
CCA18L24 18 20.3 22.5
CCA20L24 20 22.3 22.5
CCA22L24 22 24.3 22.5
CCA24L24 24 26.3 22.5
CCA26L24 26 28.3 22.5
CCA28L24 28 30.3 22.5
CCA30L24 30 32.3 22.5
CCA32L24 32 34.3 22.5