Specification Sheet

34
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
A
B
E
D
B
C
A
E
Supports:
Roof Jack Support System— For use with vertical terminations. Use to pass through combustible and
non-combustible roof structures. The roof jack support system must be installed on a flat roof or a level curb only. Each roof
jack support system includes a storm collar that provides support and when sealed, acts as a water barrier. Cannot be used
in a chase with a 1" clearance to vent. Refer to Tall Cone Flashing.
Part Number Inner DIM - A DIM - B DIM - C DIM - D DIM - E
Vent I D OD Height Above Height Below Plate Size
Diameter of Roof Jack of Roof Jack Roof Line Roof Line
CCL04RJ 4 6.5 9.1 7.25 15 24
CCL05RJ 5 7.5 10.1 7.25 15 24
CCL06RJ 6 8.5 11.1 7.25 15 24
CCL07RJ 7 9.5 12.1 7.25 15 24
CCL08RJ 8 10.5 13.1 7.25 15 24
CCL09RJ 9 11.5 14.5 7.25 15 24
CCL10RJ 10 12.5 15.1 7.25 15 24
CCL12RJ 12 14.5 17.1 7.25 15 24
CCL14RJ 14 16.5 19.1 7.25 15 27
CCL16RJ 16 18.5 21.1 7.25 15 30
CCL18RJ 18 20.5 23.1 7.25 15 32
CCL20RJ 20 22.5 25.1 7.25 15 34
CCL22RJ 22 24.5 27.1 7.25 15 36
CCL24RJ 24 26.5 29.1 7.25 15 36
CCL26RJ 26 28.5 31.1 7.25 15 36
CCL28RJ 28 30.5 33.1 7.25 15 40
CCL30RJ 30 32.5 35.1 7.25 15 42
CCL32RJ 32 34.5 37.1 7.25 15 44
Roof Jack Support System