Specification Sheet

36
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
18°
1.8"
A
12"
B
Part Number Inner Vent DIM-A DIM - B
Diameter Top of Cone Face Plate
Opening (Square)
CCM04TCFP 4 6.5 24
CCM05TCFP 5 8.5 24
CCM06TCFP 6 9.5 24
CCM07TCFP 7 10.5 26
CCM08TCFP 8 11.5 26
CCM09TCFP 9 12.5 26
CCM10TCFP 10 13.5 28
CCM12TCFP 12 15.5 30
CCM14TCFP 14 17.5 34
CCM16TCFP 16 19.5 34
CCM18TCFP 18 21.5 36
CCM20TCFP 20 23.5 38
CCM22TCFP 22 25.5 40
CCM24TCFP 24 27.5 42
CCM26TCFP 26 29.5 44
CCM28TCFP 28 31.5 46
CCM30TCFP 30 33.5 48
CCM32TCFP 32 35.5 48
Pitched Tall Cone Flashing —
Use as a vertical roof penetration in conjunction with a combustible chase. Can
be used on roofs with a 2/12 - 6/12 pitch. This part comes with a storm collar and is of all stainless steel construction. A
Vented Termination Collar must be used when installed in a combustible chase and must be ordered separately. Can be used
with Saf-T Vent CI vent when clearance to combustibles are maintained.
Pitched Tall Cone Flashing
Supports: