Specification Sheet

37
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
B
E
G
A
F
D
B
A
C
Terminations:
Wall Termination / Penetration — Use to penetrate any combustible or non-combustible wall. This part is a
thimble only and does not include any vent. Order enough vent to pass through the thimble and extend 4-8 inches beyond the
building sheathing. Includes an AL 29-4C
®
screen cover and a vent finish collar to terminate the vent system.
Part Number Inner DIM - A DIM - B DIM - C DIM - D DIM - E DIM - F DIM - G
Vent Outer Jacket Outer Thimble Face Plate Face Plate Overall Exterior Wall
Diameter Diameter Diameter Width Height Length Length Opening
CCE04WP 4 6.3 9 16 15 21.5 6 11
CCE05WP 5 7.3 10 17 16 23.5 8 12
CCE06WP 6 8.3 11 18 17 23.5 8 13
CCE07WP 7 9.3 12 18 17 23.5 12 14
CCE08WP 8 10.3 13 19 18 27.5 12 15
CCE09WP 9 11.3 14 20 19 27.5 12 16
CCE10WP 10 12.3 15 22 21 27.5 12 17
CCE12WP 12 14.3 17 24 23 27.5 12 19
CCE14WP 14 16.3 19 25 24 27.5 12 21
CCE16WP 16 18.3 21 27 26 27.5 12 23
CCE18WP 18 20.3 23 29 28 27.5 12 25
CCE20WP 20 22.3 25 31 30 27.5 12 27
CCE22WP 22 24.3 27 33 32 27.5 12 29
CCE24WP 24 26.3 29 35 34 27.5 12 31
CCE26WP 26 28.3 31 37 36 27.5 12 33
CCE28WP 28 30.3 33 39 38 27.5 12 35
CCE30WP 30 32.3 35 41 40 27.5 12 37
CCE32WP 32 34.3 37 43 42 27.5 12 39
WallTermination / Penetration