Specification Sheet

41
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
Termination Accessories:
Finish Collar — The collar is used to close off air space between inner vent and outer jacket. For use on horizontal or
vertical systems.
Part Number DIM-A DIM - B DIM - C
Inner Vent Outer Jacket Outer Collar
Diameter Diameter Diameter
CCK04FC 4 6.3 7
CCK05FC 5 7.3 8
CCK06FC 6 8.3 9
CCK07FC 7 9.3 10
CCK08FC 8 10.3 11
CCK09FC 9 11.3 12
CCK10FC 10 12.3 13
CCK12FC 12 14.3 15
CCK14FC 14 16.3 17
CCK16FC 16 18.3 19
CCK18FC 18 20.3 21
CCK20FC 20 22.3 23
CCK22FC 22 24.3 25
CCK24FC 24 26.3 27
CCK26FC 26 28.3 29
CCK28FC 28 30.3 31
CCK30FC 30 32.3 33
CCK32FC 32 34.6 35
A
C
B
Ventilation Collar — The ventilation collar is installed over the air space between the inner vent and outer jacket and
allows any built up heat to escape. The ventilation collar must be used on Tall Cone Flashing installations with a combustible
chase . For use on horizontal and vertical systems.
Part Number DIM-A DIM - B DIM - C
Inner Vent Outer Jacket Outer Collar
Diameter Diameter Diameter
CCK04FCV 4 6.3 7
CCK05FCV 5 7.3 8
CCK06FCV 6 8.3 9
CCK07FCV 7 9.3 10
CCK08FCV 8 10.3 11
CCK09FCV 9 11.3 12
CCK10FCV 10 12.3 13
CCK12FCV 12 14.3 15
CCK14FCV 14 16.3 17
CCK16FCV 16 18.3 19
CCK18FCV 18 20.3 21
CCK20FCV 20 22.3 23
CCK22FCV 22 24.3 25
CCK24FCV 24 26.3 27
CCK26FCV 26 28.3 29
CCK28FCV 28 30.3 31
CCK30FCV 30 32.3 33
CCK32FCV 32 34.3 35
C
A
B