Owner’s Manual Installation and Operation Models: TiaraE Electric Stove Read, understand and follow these instructions for safe installation and operation. • Leave this manual with party responsible for use and operation. Important operating • and maintenance instructions included. DO NOT DISCARD THIS MANUAL • CAUTION WARNING HOT! DO NOT TOUCH. SEVERE BURNS MAY RESULT. CLOTHING IGNITION MAY RESULT. Glass and other surfaces are hot during operation and cool down.
Read this manual before installing or operating this stove. Please retain this owner’s manual for future reference. Congratulations! Congratulations on selecting a Heat & Glo electric stove. The Heat & Glo stove you have selected is designed to provide the utmost in safety, reliability and efficiency. This owner’s manual should be retained for future reference. We suggest you keep it with your other important documents and product manuals.
Table of Contents 1 Listing and Code Approvals A. Appliance Certification . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Getting Started A. Important Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 5 B. Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . 5 C. Inspect Stove and Components . . . . . . . . . . . . . . . . . 5 3 Location and Clearances A. Selecting Stove Location . . . . . . . . . . . . . . . . . . . . . . . 6 B. Clearances . . . . . . . . . . . . . .
1 Listing and Code Approvals A. Appliance Certification WARNING This stove has been tested and listed in accordance with UL 2021 Standards for fixed and location-dedicated electric room heaters in the United States, the current CSA C22.2 NO. 46 in Canada, and has been listed by Underwriters’ Laboratoreis Inc. for installation as described in this manual. All components are UL or CSA safety certified.
2 Getting Started A. Important Instructions When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • • • • • • • • • • • • • • • • • • • • • Read all instructions before using this heater. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.
3 Location and Clearances WARNING DANGER Fire Risk! Electrocution Risk! Due to high temperature, this appliance should be located out of high traffic areas. • Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 ft (.9 m) from the front of the appliance. • NEVER locate this stove where it may fall into a bathtub or other water container. WARNING Fire Risk High Temperatures Keep combustible household items away from appliance.
4 Electric Stove Set Up CAUTION WARNING Sharp Edges • Wear protective gloves and safety glasses during installation. A. Leg Leveling System • • Thread allen bolts through nuts until flush. See Figure 4.1 Slide assembled nuts and bolts into the slot on the legs with the nuts on the bottom. Use a 5/32 in. (3.96 mm) Allen wrench to adjust legs to the desired level. See Figure 4.2. Shock Risk Improperly grounded outlets could cause electrical shock.
5 Operating Instructions The operating controls are located on the back of the appliance. A. Main Power Switch • When the main power switch is turned on, it provides power to all functions. When used in conjunction with RC-ELEC-HNG the switch should remain in the “ON” position. • B. Intensity Switch • Controls the intensity of the ember bed and flame. C. Heater Switch • • The heater switch provides power to the heater system. The RC-ELEC-HNG remote control does not control this function. D.
6 Troubleshooting Issues 1. Appliance doesn’t turn on with the main switch or remote transmitter. Possible Causes Solutions A. Power switch is “OFF”. Turn the power switch to the “ON” position. B. Circuit breaker is tripped. May need to put the appliance on a dedicated service or reduce the number of appliances on the circuit. C. Appliance is unplugged from wall outlet. Plug the cord into an outlet. D. Loose wiring. Check all wiring for loose connections. The bulb(s) is (are) burned out.
7 Maintenance and Servicing the Fireplace WARNING Shock Risk Burn Risk Cleaning, performing maintenance or moving this electric stove without disconnecting power and allowing the stove to cool could create a shock or burn hazard. • Turn controls to “OFF”. • Remove plug from outlet or turn off the circuit breaker to the stove. A. Cleaning Firebox and Control Compartment • • • • • • • Turn the appliance off and disconnect the power cord from the outlet. Allow the appliance to cool before cleaning.
C. Replacing the Light Bulbs CAUTION 2EMOVE THESE THREE SCREWS Burn Risk Light bulbs are hot during operation of the stove. • Allow bulbs to cool at least five minutes before touching them. The light bulbs need to be replaced when the flame and/or ember bed is dark on one side. Replace the bulbs with 75 watt halogen bulbs with mini-candelabra base. Do not exceed 75 watts per bulb. Light bulbs can be purchased at a local hardware or lighting store, online or by phone. To order online, log onto www.
8 Reference Materials A. TiaraE Dimensions 18-1/2 in. (470 mm) 35-1/2 in. (902 mm) (with optional decorative shelves) 23-1/2 in. (591 mm) (without optional decorative shelves) 27 in. (686 mm) 18-1/2 in.
B. Wiring Diagram MAIN POWER ORG If any of the original wire as supplied with the appliance must be replaced, it must be replaced with an equivalent wire gauge and 105 degree rated wire. M ORG BLK BLK BLK BLK WHT DIMMER SWITCH BLK BLK L WHT BLK BLK BLK L PLUG WHT WHT HEATER SWITCH THERMOSTAT All wiring is to be done by a qualified electrician. WHT BLK BLK BLK BLU FAN M BLK ! WHT BLK CAUTION! Risk of electrical shock! Disconnect electric power before servicing.
D.
E. Limited Warranty WARRANTY Hearth & Home Technologies Inc. (HHT) Electric Fireplaces are tested and inspected prior to shipment and are guaranteed from defect to the purchaser of each new product. Any part which proves to be defective in material or workmanship under normal use within one year will be repaired or replaced without charge.* The Company will not be responsible for any expense incurred for installation, removal from service, or transportation costs.
F. Contact Information Hearth & Home Technologies Inc. 800 W. Jefferson Lake City, MN 55041 Please contact your Heatilator dealer with any questions or concerns. For the number of your nearest Heat & Glo dealer, please call 1-888-427-3973. – NOTES – CAUTION • Leave this manual with party responsible for use and operation. Read, understand and follow these instructions for safe installation and operation. Important operating • and maintenance instructions included.
