Gas Heater User Manual

ManualsBrandsHeat & Glo LifeStyle ManualsGas HeaterST-38HV-AU

IMPORTANT: Read all instructions carefully before starting installation.

Failure to follow these installation instructions may result in a possible fire

hazard and will void the warranty. Save this manual for future reference.

Heat & Glo, a brand of Hearth & Home Technologies, Inc.

20802 Kensington Blvd., Lakeville, MN 55044, USA

MODEL ST-38HV-AU

IS AUSTRALIAN GAS ASSOCIATION

APPROVED FOR NATURAL GAS OR

PROPANE AS A BALANCED FLUE

HEATER.

Refer to the appliance data plates for gas

consumptions and pressures.

Installation of this appliance should only be

carried out by an authorized person in accor-

dance with the manufacturers instructions. All

relevant codes and regulations laid down by

the gas fitting authorities, municipal building

regulations, electrical wiring regulations, and

the requirements of the AGA Gas Installation

Code must be observed.

This appliance and its components are tested

and safe when installed in accordance with

this Installation Manual. Report to your dealer

any parts damaged in shipment, specifically

check glass condition. Read all instructions

before starting installation and follow these in-

structions carefully during installation to ensure

maximum benefit and safety. Failure to follow

them will void your warranty and may present

a fire hazard.

The Heat & Glo warranty will be voided by, and

Heat & Glo disclaims any responsibility for the

following actions:

• Installation of any damaged heater or flue

system component

• Modification of the heater or balanced flue

system installation other than as instructed

by Heat & Glo.

• Improper positioning of the gas logs or the

glass door

• Installation and/or use of any component

part not manufactured or approved by Heat

& Glo , not withstanding any independent

testing laboratory or other party approval

of such component part or accessory.

INSTALLATION AND OPERATION INSTRUCTIONS

PLEASE READ THIS MANUAL BEFORE INSTALLING AND

USING THIS APPLIANCE.

Heat & Glo

Quality Systems

registered by SGS ICS