HEAT STORM NEED HELP? call us: email us: 435-752-6611 cs@heatstorm.com User Manual and Safety Instructions Logan Cabinet Heater 1500 W - FORCED AIR - QUARTZ INFRARED ELEMENT Visit us at: heatstorm.
TABLE OF CONTENTS: Introduction...................................................................1 Safety Awareness....................................................2 Operations & Controls........................................8 Troubleshooting Guide......................................13 Questions & Answers.......................................... 16 Return Policy................................................................18 1 Year Limited Warranty....................................
Introduction Thank you and congratulations on your purchase of your Heat Storm™ Infrared heater! PLEASE READ THIS MANUAL BEFORE OPERATING THIS APPLIANCE. WARNING: IF THE DIRECTIONS IN THIS MANUAL ARE NOT FOLLOWED, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER HEATING APPLIANCE.
Safety & Awareness In order to avoid overheating, do not cover the heater. It cannot be used in a wardrobe. CAUTION: Whenever the heater is left operating and unattended, caution may be necessary if children or invalids are nearby. The appliance should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Do not run the cord under carpeting. Do not the cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances. Place the cord away from high traffic areas, and place the cord and heater where it will not be tripped over. HEAT STORM To disconnect the heater, power off the device, wait for the fan to stop blowing to ensure the inside of the heater has been properly cooled, then remove plug. Connect to properly grounded outlets only.
Never use with an extension cord or relocatable power tap (outlet/ power strip). This heater is for use on 120 volt standard outlets. HEATER LOCATION When choosing a location for your new heater, ensure that the general instructions are followed. For best effect, install the heater out of direct sunlight.
. All other warranties – expressed or implied –with respect to the product, its components, and accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly excluded. WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons. 8.
Can I use more than one heater at a time? Yes, but make sure they are not on the same electrical circuit. Each heater and appliance should be on its own circuit. If you are on the fence about having 2 heaters in a room, we recommend the second heater. The heaters will work together and spend more time in eco mode. This will prolong the lifespan on your elements, save on power, and ensure that your room warms up faster.
Return Policy If you purchased the heater directly from EnergyWise Solutions, we will refund the total sales amount when merchandise is received: 1) in new condition, 2) packed in its original manufacturers box and all original packaging material included, 3) original manuals and any accessories that came with the item also included.
Operations & Controls CONTROL PANEL Celsius & Fahrenheit Power Bu�on Half Power Mode POWER Temperature control arrows - Once the heater is plugged into the outlet it will be in standby mode (power button will be blue). - The On/Off button needs to be pressed in order to turn on the heater and operate the remote control.
Questions & Answers Why does the Blower Fan keep running after I have turned off the unit? The Blower Fan will continue to run until the heat chamber has cooled down. After a few minutes the fan will shut off automatically. This ensures that the quartz infrared heating elements are cooled properly helping to ensure the longevity of your heater. Can the heating elements be replaced? Yes. Contact an authorized repair center, generally, this is the store where you purchased your heater.
CHILD LOCK FEATURE - Press the On/Off button for 5 seconds to engage child lock. The power button will flash red and blue when the child lock is on. When the child lock is on, no changes can be made to the settings until the child lock is turned off. NOTE: Setting the child lock feature can only be performed using the Control Panel on the heater or through the Smart life app on Wi-Fi models, and is not available using the remote control.
Installing the heater near objects may cause the air in your room not to circulate and therefore have widely varying temperatures within the same room. WASHABLE LIFETIME FILTER SYSTEM Heat Storm™ Infrared Heaters come equipped with a washable lifetime filter which is easy to clean. • Disconnect the unit from the wall outlet for 2 hours. After 2 hours, plug the unit back into the wall outlet. If the problem persists call customer service at 435-752-6611.
RECALIBRATING YOUR HEATER If your heater is not working like normal, try resetting it. Heaters are like other electronics, sometimes they need a reboot. Soft Reset – Press and hold down the power button for 30 seconds. Release and give the heater a moment to reset. Note: This can only be done on the control panel on the heater and is not available using the remote control. Hard Reset – Press and hold down the power button on the unit.
