Use and Care Manual

II. General Instructions
Before installing and using your DIAMANT/EMERAUDE radiator, please
read these instructions carefully and observe the following instructions :
SAFETY INSTRUCTIONS
-The electrical connection must be carried out by a qualied electrician.
The installation must be protected by a 25 or 30 mA differential circuit-
breaker (NFC15-100 electrical safety standard). The power supply outage must be
of omnipolar type (phase and neutral cut-off).
The radiator DIAMANT/EMERAUDE must be connected to the power supply (120V
AC 60Hz) by an electrical circuit protected by an overcurrent circuit breaker10A
placed in an electrical distribution board.
A means of disconnection shall be provided in the xed pipes in accordance
with the installation rules.
If the power cable is damaged, it must be replaced by a qualied electrician
(cable type SJOOW 14/2).
The system complies with current standards (see technical data).
The radiator DIAMANT/EMERAUDE is only suitable for indoor use. It is suitable for
all the rooms of the housing, including bathrooms thanks to a suitable protection
(Double insulation - Class II).