BN-RITB January 2004 (Replaces 107.
Table of Contents Model TA Thin Profile Air Defrost.................................................................................................................... 3 Model TL Thin Profile Electric Defrost........................................................................................................... 4 Model C High Profile........................................................................................................................................... 5 Model VA Vee-Aire...............
Model TA Thin Profile Air Defrost Reach-In Unit Cooler Features • Textured aluminum cabinet • Molded Lexan® guards and fans • Drain fitting mounted at 45-degree angle so drain can be run through back or bottom of refrigerator • Room for expansion valve inside the unit • Stainless steel screws • Motors are thermally protected and permanently lubricated • Convenient, moistureproof motor plug • Compact design! Does a big job in a small space • Optional Bohn-Kote® coated coil available (Model TAK) for optim
Model TL Thin Profile Electric Defrost Reach-In Unit Cooler Features • Electric defrost insures positive heat source • Built-in fan delay allows coil to be chilled before returning to the normal cooling cycle • Defrost terminates on coil temperature eliminating excessive defrost period • Textured aluminum cabinet • Molded Lexan® guard • Knockouts provided on sides for electrical connections - opening in rear for coil connections • Stainless steel screws • Motors are thermally protected and permanently l
Model C High Profile Reach-In Unit Cooler Features • Textured aluminum cabinet • Molded Lexan® guard • Drain fitting at 45-degree angle so drain can be run through bottom or back of refrigerator • Aluminum hangers automatically space the unit to the correct distance from the back wall • Stainless steel screws - prevent rust streaks • Room for expansion valve inside the unit • Knockouts in sides and top plus openings in rear provide maximum flexibility for electrical connection • Full collar aluminum fins o
Model VA Vee-Aire Reach-In Unit Cooler Features • Textured aluminum cabinet • Molded Lexan® fan guard • Improved drain pan overlaps coil surface to catch all condensate • Stainless steel screws - prevent rust streaks • Plate-type aluminum fins with full collars on expanded copper tubes • Expansion valve mounts inside cabinet • Internal junction box for electrical connection • Pigtail leads in junction box • Motors are thermally protected and permanently lubricated • Top quality throughout in a co
Models BBM/BBL Back Bar Reach-In Unit Cooler Features • Molded Lexan® fan guards • Coils have copper tubes with aluminum fins, mechanicallybonded for efficient heat transfer.
Model KMK Kompact Mullion Reach-In Unit Cooler Features • • • • Light grained aluminum cabinets PVC coated fan guard Stainless steel hardware Coils have full collar aluminum fins on expanded copper tubes Bohn-Kote® coated coil for optimum protection in corrosive environments Refrigerant connection knockouts provided on both ends of unit Expansion valve mounts inside the unit Motors are thermally protected and permanently lubricated Internal junction box for electrical connection Adjustable air defle
Model RAMK Reverse Air Flow Kompact Mullion Reach-In Unit Cooler Features • • • • • • • • • • • • Textured aluminum cabinet PVC coated fan guard Stainless steel hardware Coils have full collar aluminum fins on expanded copper tubes Bohn-Kote® coated coil for optimum protection in corrosive environments Refrigerant connection knockouts provided on both ends of unit Expansion valve mounts inside the unit Motors are thermally protected and permanently lubricated Internal junction box for electrical con
Model BTO Twin Flow Reach-In Unit Cooler Features • Compact two-way design with medium velocity air flow • Mounts flush to the ceiling and draws air in through the fan and discharges out both sides • Air pattern reduces air loss when doors are opened and the medium velocity reduces product drying • Textured aluminum cabinet • Stainless steel fasteners • Molded Lexan® fan guards • Drain pan and fan panel is easily removed for installation and servicing • Optional Bohn-Kote® coated coil available (Model BTOK
Model U Reach-In Unit Cooler Features • • • • • • • • Textured aluminum cabinet Full collar aluminum fins on expanded copper tubes Detachable drain pan that is easy to clean Molded 3-prong motor connector to save installation time and expense Motors are thermally protected and permanently lubricated Optional Bohn-Kote® coated coil available (Model UK) for optimum protection in corrosive environments All models are UL listed for the US and Canada UL classified to NSF standards Application Model U is us
For more information on Bohn refrigeration products, contact your Sales Representative or visit us at www.thecoldstandard.com. A Brand of Heatcraft Refrigeration Products LLC 2175 West Park Place Blvd. • Stone Mountain, GA • 30087 (800) 537-7775 • FAX (770) 465-5990 www.thecoldstandard.com Since product improvement is a continuing effort, we reserve the right to make changes in specifications without notice.