Installation Guide

Installation Below a Ceiling/Roof Structure
When the Saf-T Vent or Saf-T CI Vent must extend down below a Saf-T Vent Roof Support Jack more
than 30 Feet or if the system extends above the roof jack more than 6 feet. and is supported by a Guy
Section above the roof line.
1. Attach the guy section at any point before an elbow or tee in the vertical drop within 30 feet of the roof
support system
2. Attach stainless steel or galvanized cable with a minimum rated capacity of 500 lbs to each of the 4
anchor holes.
3. Securely anchor the cables to a rigid building member using appropriate anchors.
PI-CIGUY R0400