Installation Guide

10
Saf-T Vent
®
Appliance Adapters
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Heat-fab, Inc.
Over-the-Flue-Collar Appliance Adapter — A generic flue collar adapter used on appliances with vent outlets that
are slightly out-of-round or of irregular diameters. The split-seam design allows the adapter to clamp around irregular or inconsistent flue
collars while still providing a secure connection to Saf-T Vent systems.
5301BOI 3 2.85 8 1.5
5401BOI 4 3.75 8 1.5
5501BOI 5 4.75 8 1.5
5601BOI 6 5.75 8 1.5
5701BOI 7 6.75 8 1.5
5801BOI 8 7.75 8 1.5
5901BOI 9 8.75 8 1.5
51001BOI 10 9.75 8 1.5
51201BOI 12 11.75 8 1.5
51401BOI 14 13.75 8 1.5
51601BOI 16 15.75 8 1.5
Part Number DIM - A DIM - B DIM - C DIM - D
Nominal Minimum Installed Minimum
Diameter Flue Collar Length Recommended
Diameter Interface Length
Over-the-Flue-Collar
Appliance Adapter
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E
Nominal Male End Overall Length Crimp Length Maximum
Diameter Crimp O.D. Clamp Diameter
9363 3 2.9 4 0.75 3.5
9464 4 3.9 4 1.75 4.5
9565 5 4.9 4 1.75 5.5
9666 6 5.9 4 1.75 6.5
9767 7 6.9 4 1.75 7.5
9868 8 7.9 4 1.75 8.5
Into-the-Flue-Collar Appliance Adapter — A generic flue collar adapter used on appliances with vent outlets with
a nominal inside diameter. The crimped portion of this adapter is inserted into the flue collar while the hose clamp is tightened around the
outside to create a mechanical joint.
Into-the-Flue-Collar
Appliance Adapter