Installation Guide

20
Saf-T Vent
®
Appliance Adapters
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Heat-fab, Inc.
Appliance Makes and Models:
General Notes:
The following appendix includes adapters from all of Heat-fab’s Saf-T Vent brands ;
EZ Seal, SC, CI, and CI Plus.
Adapters are listed by the appliance manufacturer.
Heat-fab Saf-T Vent adapters are compatible with all of Saf-T Vent brands pipes and fittings.
CI to EZ Seal, for more details please refer to Technical Bulletin # 11719.
CI or EZ Seal to CI Plus requires an adapter, refer to publication PI-CCADKT.
CI Plus to CI or EZ Seal requires an adpater also, refer to publication PI-CCADSV.
Terms:
Burnham Vent ONLY – The only AL 29-4C vent approved for this late-model appliance is
Burnham’s proprietary venting system. Contact Burnham Corporation for a local supplier.
Call Heat-fab – At the time of publication an appliance adapter had not been determined.
Please call Heat-fab at 800-772-0739 for our current recommendation.
Factory Accessory (HF) – This is an accessory supplied by the Appliance Manufacturer for
some venting configurations. The vent connection on the accessory is equipped with
Heat-fab’s standard female end. No separate adapter is required.
Factory Supplied (Gen.) – The appliance is shipped with a generic flue collar that will accept
a standard male end of a Heat-fab Saf-T Vent product. No separate adapter is required.
Factory Supplied (HF) – The appliance’s flue collar is equipped with Heat-fab’s standard
female end. No separate adapter is required.
Vent Kit (HF) – A standard vent kit for this model is available from Heat-fab.
Vent Kit (Mfg.) – A standard vent kit for this model is available from the ApplianceManufacturer.
Don’t See Your Appliance?
If your appliance is not listed, please give us a call at
800-772-0739. We’ll work with you and the
Appliance Manufacturer to find a solution.