Specification Sheet

23
Heatfab Division, Selkirk Corp.
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
Saf-T Vent
®
CI Plus
DOUBLE WALL AL 29-4C
®
SPECIAL GAS VENT
90° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for this fitting is equivalent to 15 feet of horizontal vent. The inlet connection
rotates to accommodate direction changes. Each elbow comes standard with a coupler, joint locking strap, and a rotating
clamp. For diameters above 24" use two 45° elbows.
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM - F
Nominal Nominal Rise Run Combined Offset
Diameter Diameter Installed Height
Inner vent Outer Jacket
CCA04E90 4 6.3 11.7 11.3 2 3 23
CCA05E90 5 7.3 12.3 11.8 24 24
CCA06E90 6 8.3 12.8 12.3 25 25
CCA07E90 7 9.3 13.3 12.8 26 26
CCA08E90 8 10.3 13.8 13.3 27 27
CCA09E90 9 11.3 14.3 13.8 28 28
CCA10E90 10 12.3 14.8 14.3 29 29
CCA12E90 12 14.3 15.8 15.3 31 31
CCA14E90 14 16.3 16.8 16.3 33 33
CCA16E90 16 18.3 17.8 17.3 35 35
CCA18E90 18 20.3 18.8 18.3 37 37
CCA20E90 20 22.3 19.8 19.3 39 39
CCA22E90 22 24.3 20.8 20.3 41 41
CCA24E90 24 26.3 21.8 21.3 43 43
Elbows:
B
A
90°
D
C
F
E