Safety data sheet

ManualsBrandsHEATFACTORY ManualsCamping & OutdoorMini Wärmepad

Air‐activatedExothermicWarmers

HeatFactoryUSA,Inc

Date:10/15/2015

Page|1

Safety Data Sheet

Section 1. Product and Company Information

Product Name: Air-activated Exothermic Heating sachets of various styles:Heat

Factory, Duck Dynasty, Stay Warm, HandiHeat; Hand Warmers,

Footwarmers, Footwarmer Insoles, Adhesive Toe Warmer, Large

Size Warmers, Body Warmers, Shipping Warmers.

Other Means of Identification: Soft flexible sachet style heating pad wrapped in plastic outer film,

Air-activated disposable warmers.

Company Name: Heat Factory USA, Inc

Department Contact: Production & Quality Control

Address: 1958 Kellogg Ave, Carlsbad, CA. 92008, USA

Telephone Number: 760-893-8300

E-mail address: SDS@heatfactoryusa.com

Section 2. Hazard Identification

Hazard Properties: Not Classified

Appearance & Odor: Solid, Odorless

Health Hazards: Burns may occur when not used properly

Physical Hazards: Low when used under normal intended use.

Section 3. Composition, Ingredients Information

Substance: Mixture

Common Name: Air-Activated heat pad (sachet)

Harmful Substances: No known hazardous substances

Ingredient Composition Nylon Non-woven fabric containing heating elements

Product Content: Heating Elements content listed in table below

** Exact percentages have been withheld

as a trade secrete

Chemical name

CAS No.

Concentration

Range(wt %)

Iron powder 7439-89-6 45-60

Activa

7440-44-0 8-12

Vermiculite 1318-00-9 5-10

Potassiu

7440-09-7 1-5

Water 7732-18-5 25-35

Summary of content (6 pages)

PAGE 1
Air‐activated Exothermic Warmers Heat Factory USA, Inc Date: 10/15/2015 Safety Data Sheet Section 1. Product and Company Information Product Name: Air-activated Exothermic Heating sachets of various styles:Heat Factory, Duck Dynasty, Stay Warm, HandiHeat; Hand Warmers, Footwarmers, Footwarmer Insoles, Adhesive Toe Warmer, Large Size Warmers, Body Warmers, Shipping Warmers.
PAGE 2
Air‐activated Exothermic Warmers Heat Factory USA, Inc Date: 10/15/2015 Section 4. First-aid Measures General First Aid Overview: Show this safety data sheet to doctor or attending medical administer. Always consult with physician if the abnormal conditions persist after taking the measures listed in this SDS. Eye Contact: Immediately rinse thoroughly and continuously with plenty of clean water for 15 minutes or more. Remove any contact lenses if present. Continue to rinse if needed.
PAGE 3
Air‐activated Exothermic Warmers Heat Factory USA, Inc Date: 10/15/2015 Methods of Containment Prevent the further leakage or spillage if safe to do so. Prevention of Secondary Accident: Remove anything from vicinity that may contribute to a secondary fire or other hazard. Methods of Clean up: Pick up and transfer to properly labeled containers. Section 7. Handling and Storage Safe Handling: Avoid contact with eyes.
PAGE 4
Air‐activated Exothermic Warmers Heat Factory USA, Inc Date: 10/15/2015 Flammability (solid, gas): Flammability or explosive limits: Upper flammability: Lower flammability: Vapor pressure: Vapor density: Relative density: Specific Gravity: Water Solubility: Partition coefficient: n-octanol/water: Auto-ignition Temperature: Decomposition Temperature: Viscosity: Explosive Properties: No Applicable Information Available No Applicable Information Available No Applicable Information Available No Applicable Inf
PAGE 5
Air‐activated Exothermic Warmers Heat Factory USA, Inc Date: 10/15/2015 Section 12. Ecological Information Ecotoxicity: Persistence & Degradability: Bioaccumulative Potential: Mobility in Soil: Other Adverse Effects: No applicable information available No applicable information available No applicable information available No applicable information available No applicable information available Section 13.
PAGE 6
Air‐activated Exothermic Warmers Heat Factory USA, Inc Date: 10/15/2015 Section 16. Other Information Section 16. Other Information This SDS has been prepared based on the best available information however, it may not be sufficient in some cases. It is user’s responsibility to modify or update any contents in this SDS regarding information on hazardous properties and/or instruction for safe handling of the product when they become available.