Chime Extender Owner's Manual

-7-
598-1070-04
12345678
1. Unplugchimefrompowersource.
2. Openthecasesandlocatethejumpersonboththechimeextenderand
chime(seeFigure8).
3. Thechimeextenderandchimebothhaveeightdifferentjumperlocations.
Jumperpositions1through7areusedforsettingthecode.
4. Tochangethecode,either:
• Addajumpertothesamelocationonboththechimeextenderandthe
chime or...
• Removeajumperfromthesamelocationonboththechimeextenderand
the chime or...
• Moveajumperonthechimeextenderfromonelocationtoanother.Move
thecorrespondingjumperonthechimetomatchthenewlocationinthe
chimeextender.
 Example:Movejumperatlocation“5”tolocation“4”onboththechime
extenderandthechime.
Note:

Note:Unitwillcomefactorysetwithjumpersinlocations5,6,and7onthe
chimeextenderandonthechime.
The range of the wireless chime can vary with location, temperature, and
batterycondition.
InsideChime
Extender
BackofChime
Note: Some models might require
the use of tweezers to remove
andreplacethejumpers.
Figure 8
12345678
*CodeSettings
1-7MustMatchBoth
SensorandChime
Remove
screwtoopen
access door