Instructions / Assembly

6 598-1135-10
Maximum
Coverage Angle
Maximum Range
Indoor Motion Sensor Coverage Area
Motion Sensor Controls
30 ft.
(9.1 m)
150°
51TEST
ON-TIME
(MINUTES)
RANGE
MAX
MIN
CODE
1 2 3 4
5 1 TEST
ON-TIME
(MINUTES)
MINMAX
DETECT
RANGE
DAY
NIGHT
NIGHT
ONLY
Range Control
LED
Indicator
ON-TIME Control
Outdoor Motion Sensor
Indoor Motion Sensor
Indoor and Outdoor Motion Sensor Sensitivity
The detector is most sensitive to motion across its field of view.
Motion
Most SensitiveLeast Sensitive
Motion
Sensor Sensor
Aim Sensor Down
for Short Coverage
Aim Sensor Higher
for Long Coverage
Adjusting Indoor Motion Sensor Coverage
Maximum
Coverage Angle
Maximum Range
Outdoor Motion Sensor Coverage Area
70ft.
(21 m)
8 ft.
(2.4 m)
180°
Aim Sensor Down
for Short Coverage
Aim Sensor Higher
for Long Coverage
Adjusting Outdoor Motion Sensor Coverage
3. AdjustRANGEControl.Toincreasesensitivity,turntheRANGE
control toward MAX. To decrease sensitivity, turn the RANGE
control toward MIN. Note: If the RANGE is set too high, false
triggering may result in some environments.
Note: When using test mode to check operation in the day time:
A. SettheDETECTcontrolswitchtoDAY/NIGHTand
B. Set the ON-TIME control to TEST.
4. Set ON-TIME Control. Determine the amount of time you want
the connected device to stay on after motion is detected (1 or
5 minutes). Slide the ON-TIME control to the corresponding
setting.
IMPORTANT: Avoid Aiming Control At:
• Objectsthatchangetemperaturerapidly,suchasheatingvents,
fans, and air conditioners. These air sources could cause false
triggering.
• Areaswherepetsortrafcmaytriggerthecontrol.
• Nearbylarge,lightcoloredobjectsreectinglightmaytriggerthe
shut-off feature. Do not point other lights at the sensor.