Wireless Outdoor Power Control Owner's Manual

© 2007 HeathCo LLC 598-1108-05
Features
• Add switched outlet convenience without rewiring.
• Tested and approved for outdoor use.
• Eight selectable channels available, so multiple switches can be used in the
same home.
• Allows remote or dusk-to-dawn operation.
• Car visor clip included for convenience.
Wireless Outdoor
Power Control
Model 6022
Operation
Eight selectable channels allow the user to
operate several systems at different loca-
tions in your home. If purchasing more than
one wireless control system, select different
operating channels for each system or they
will interact with each other.
1. Remove Tab from Battery Chamber.
Remove cover from back of transmitter
by pressing on it with your thumb and
sliding it off as shown in Figure 1. Gently pull tab out of battery chamber.
Slide cover onto transmitter.
2. Plug in Outdoor Module. Remember, the outdoor module requires a grounded
outlet. If you do not have a grounded outlet, you should contact an electrician
to upgrade your electrical system for your safety. See precautions before
using module (see page 2).
3. Mount Outdoor Module. Hang module with two nails or screws. There are
two keyholes on the back for this purpose (see Figure 2, page 2). DO NOT
allow module to hang by cord.
Manual
Switch
Auto
Switch
ON Switch
OFF Switch
LED Indicator Light
Device
Receptacles
Light Sensor
Cover
Grounded Plug
Remote Control
Outdoor Module
12-Volt (A23 Type)
Battery (Included)
Car Visor
Clip
Figure 1
ON DIP
1 2 3 4
ON DIP
1 2 3 4
Battery
Chamber
(Type A23)
Battery
Cover
Tab
Positive Terminal