User's Manual

598-1116-00

DRAFT COPY

1 2 3 4

Dip Switches

Battery

Cover

6-Button Remote Control

PAR Light Receiver

Dip Switches

Indoor Plug-In Receiver

DIP SWITCH LOCATIONS

1 2 3 4

Dip Switches

Screw

Cover

Indoor/Outdoor Screw-In Light Receiver

Remote Motion Sensor

DETECT

CODES

1234

DAY

NIGHT

ONL

Dip

Switches

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE

1. Circuit breaker or fuse is turned off.

2. Switch on device is turned off.

3. Device is defective. Try remote using different device.

4. Signals from transmitter are being blocked, or transmitter is out of

range. Check for metal objects that could block the signal, or

reposition the transmitter.

5. Weak battery in the transmitter.

6. Dip switches on remote control and wireless unit(s) do not match.

1. Same as 4, 5, and 6 above.

1. Short term power line failure.

2. Another transmitter on the same channel.

SYMPTOM

Device does not come

on.

Device does not turn

off.

Device comes on ran-

domly.