User's Manual

-4-
598-1105-08
1 2 3 4 5 6 7 8
O N
1 2 3 4 5 6 7 8
ON
+
(+)PositiveBattery
Terminal
InsertBatteries(+)
PositiveSideUp

 
• Makesurepushbuttonandchimecodesarethesame(seeFigure5).
• Checkorientationofpushbuttonbatteries(Seeinsidebackcover
ofpushbuttonforcorrectbatteryorientation).
• Checkchargeofpushbuttonandchimebatteries(ifapplicable),
replaceifnecessary.
 Chimeisreceiv-
inginterferencefromanotherwirelessdevice;changethecodesetting
(see Code Settingbelow).
 
• Donotmountchimeorpushbuttononmetalornearmetalstuds.
Thisreducesthetransmitterrange.Use1/4"to1/2"(6to13mm)
woodshimstomovechimeorpushbuttonoffmetalsurface.
• Concreteoorsmayreducerange.Movechimeawayfromoor.
• Trylocatingchimeclosertopushbutton.
Figure 4 - Inside Push Button
Note: See inside back cover of push button for battery size (CR 1220 or CR 2032),
orientation, and quantity.