Manual

12
Pour the lava granules on the floor of the fireplace in front of the bottom burner.
NOTE: These granules are for use only to cover the fireplace floor and are not to be used in or on the burner itself.
Do not place lava rock on or near the burner. Place in front and
around sides of the ember bed, not on it.
CONTACT WITH BURNER CAN CAUSE CARBON MONOXIDE.
Periodically clean loose particles, dust and lint from pilot and front and rear burner
ports. Clean burner air intake holes. Failure to do so may result in sooting and poor com-
bustion.
Logs and volcanic rock must be positioned correctly. Failure to do so may result in sooting
and poor combustion.
Do not operate ceiling fans while using this heater. Drafts from fans may alter flame pat-
tern, which could result in sooting and poor combustion.
If unit is installed in an existing fireplace, do not operate heater with glass doors closed.
This will result in sooting and poor combustion.
PLACEMENT OF LAVA GRANULES
WARNING
INSTALLER: Please be sure the homeowner understands these key points.
LOGS AND VOLCANIC ROCK MUST BE POSI-
TIONED CORRECTLY. FAILURE TO DO SO MAY RE-
SULT IN SOOTING AND POOR COMBUSTION.
WARNING : FAILURE TO POSITION THE PARTS IN ACCORD-
ANCE WITH THESE INSTRUCTIONS OR FAILURE TO USE ONLY
PARTS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY
RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY.
LOG PLACEMENT
A DIAGRAM OF THE LOG SET IS IN THE BOX WITH YOUR LOGS.
LOG & LAVA Placement & IPI ECO Burner Operation