Wooden Fire Pit Chiminea MODEL # : SRCH06D Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-909-3888, 7:30 a.m. - 4:30 p.m., PST, Monday - Friday, or email to customerservice@shinerich.
PACKAGE CONTENTS A B C E D F G H I J K L PART A B C D E F G DESCRIPTION Chimney cap Chimney mesh cover Chimney body Sliding door assembly Screen assembly Charcoal grid Upper stove assembly QUANTITY PART H I J K L 1 1 1 1 1 2 1 2 DESCRIPTION Lower stove bowl Ash tray assembly Leg Poker Log rack assembly QUANTITY 1 1 4 1 1
HARDWARE CONTENTS (shown actual size) AA Nut CC BB M6 x 12 mm Bolt Qty. 16 Qty. 4 EE FF M6 x 15 mm Flat Bolt M6 x 20 mm Flat Bolt Qty. 4 DD Washer Spring Washer Qty. 20 Qty. 16 GG M6 x 15 mm Bolt Qty. 4 Qty. 8 SAFETY INFORMATION WARNING: • The chiminea is intended for outdoor use only. Keep it at least 12 inches from walls and 36 inches from an overhang. Do not use on wooden decks. • The chiminea is intended to burn wood logs only. Do not burn coal, leaves or other combustibles.
ASSEMBLY INSTRUCTIONS 1. Line up the upper stove assembly (G) and lower stove bowl (H). Position the legs (J) beneath bowl (H) and attach using M6 x 15 mm bolts (GG), nuts (AA), washers (CC) and spring washers (DD). 1 GG Hardware Used AA Nut G H J DD x8 CC Washer x8 DD Spring Washer x8 GG M6 x 15 mm Bolt x8 2. Place log rack assembly (L) in the center of unit and attach to legs (J) with M6 x 12 mm bolts (BB) and washers (CC).
ASSEMBLY INSTRUCTIONS 3. Align the door of screen assembly (E) and gap of lower stove bowl (H). Attach the smaller end of screen assembly (E) onto upper stove assembly (G) with washers (CC), spring washers (DD), nuts (AA), and M6 x 15 mm flat bolts (EE). Nut EE CC Hardware Used AA 3 DD AA x4 E CC Washer x4 DD Spring Washer x4 EE M6 x 15 mm Flat Bolt x4 4. Hang the sliding door assembly (D) onto support bar of screen assembly (E).
ASSEMBLY INSTRUCTIONS 5 5.Attach chimney body (C) on the top of screen assembly (E) with washers (CC), spring washers (DD), M6 x 20 mm flat bolts (FF) and nuts (AA). FF CC DD AA Hardware Used C AA Nut x4 CC Washer x4 DD Spring Washer x4 FF M6 x 20 mm Flat Bolt x4 6. Place the charcoal grid (F) in upper stove assembly (G) and attach it onto the support bracket. Then place chimney mesh cover (B) and chimney cap (A) on top of chimney body (C).
ASSEMBLY INSTRUCTIONS 7. Insert the ash tray assembly (I) into the track on upper stove assembly (G). Place the poker (K) on the log rack assembly (L).
LIGHTING INSTRUCTIONS 1. Open the sliding door using the poker, and put the log(s) (less than 4 lb.) on the charcoal grid. (NOTE: Make sure log does not extend to the charcoal grid edge, and the log height does not extend 14 in. The fire height should not extend 3/4 the height of screen.) 2. Light dry wood chips under logs. Close the sliding door with poker. CARE AND MAINTENANCE Inspecting Inspect this chiminea on a regular basis to ensure product safety and longer product life.
ONE-YEAR LIMITED WARRANTY The item has been manufactured under the highest standards of quality and workmanship. We warrant to the original consumer/purchaser that all aspects of this product will be free of defects in material and workmanship for one (1) year from the date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine parts are not covered by this warranty.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-888-909-3888, 7:30 a.m. - 4:30 p.m PST, Monday - Friday or e-mail to customerservice@shinerich.us.
