RANCH FIRE PIT MODEL # : SRFP9624 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-909-3888, 7:30 a.m. - 4:30 p.m., PST, Monday Friday, or send an email to customerservice@shinerich.
Package Contents AX1pcs BX4pcs CX4pcs DX4pcs EX1pcs FX1pcs GX1pcs HX1pcs EEX4pcs AAX12pcs PART DESCRIPTION QUANTITY FFX8pcs HARDWARE CONTENTS A Fire Bowl 1 B Leg 4 C Support Ring Section 4 D Table Panel 4 E Cooking Grate 1 F Log Rack 1 EE M6 Nut G Cooking Grate Stand Bar 1 FF M8 Washer H Poker 1 12 2
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING FOR YOUR SAFETY 1. This item is for outdoor use only, and shall NOT be used in a building, garage or any other enclosed area. 2. DO NOT use this fire pit for indoor heating. TOXIC carbon monoxide fumes can accumulate and cause asphyxiation. 3. This fire pit is NOT for commercial use. 4. This fire pit is NOT to be operated by children. 5.
Warnings 14. Do NOT store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. 15. Do NOT store or use an LP gas cylinder within 10 feet (3.05m) of this fire pit while it is in operation. 16. Do NOT use this fire pit near automobiles, trucks, vans or recreational vehicles. 17. Do NOT use in an explosive atmosphere. Keep outdoor area clean and free from combustible materials, gasoline and other flammable liquids. 18.
Warnings THIS FIRE PIT CAN BE USED (not served) AS A GRILL COOKING TIPS WARNING Do not grasp the cooking grate with your hand s while it is hot. Use barbecue mitts for handling. Do not use water. FOOD SAFETY TIPS Always wash your hands thoroughly with warm soapy water before starting your meal preparations and after handling fresh meat, fish and poultry. Defrost meat, fish and poultry in the refrigerator before cooki ng, not at room temperature.
Assembly Instructions NOTE: Assemble the fire pit on a non-abrasive surface. Step 1 Attach (4) legs (B) to fire bowl (A) with (8) M8 Nut (CC) and (8) M8 Washer (FF). 1 Hardware Used FF M8 Washer Step 2 Insert one support ring section (C) into another and attach the support ring assembly to leg (B) with (2) M6 Bolt (AA) as illustrated. Repeat the same procedure to install the other support ring sections (C).
Assembly Instructions Step 3 Secure (4) support ring sections (C) with (4) M5 Bolt (DD). 3 D Insert the pins on table panels (D) into the fixed brackets on the fire bowl (A). Attach (4) Wing Bolt (BB) to the fixed brackets on the fire bowl (A) as illustrated. BB A DD NOTE: The protruding pin on the table panel (D) should be placed right upon the pole on the fire bowl (A).
Assembly Instructions Step 5 5 Attach the cooking grate(E) to the cooking grate stand bar(G) with (1) Wing Bolt(BB) as illustration. Note: Do NOT move the parts or change the configuration during use or while the parts are hot.
Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural fire-starter onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is put to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or fire-starter. Tending the Fire You may need to shift and/or add logs for an ideal experience. 1.
Warranty Information The appliance has been manufactured under the highest standards of quality and workmanship. We warrant to the original consumer purchaser that all aspects of this product will be free of defects in material and workmanship for one year from the date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine parts are not covered by this warranty.
