User's Manual

Safety Instructions

Please read the following safety instructions carefully before setting up your system. Keep the

instructions for subsequent reference. Please read the warnings and follow the instructions.

• To reduce the risk of an electric shock, do not open the loudspeaker yourself. Always refer to

qualied service personnel.

• This is an active loudspeaker. It must be connected with an IEC 60320 AC mains power cord

like the one supplied with the product.

• Please switch o your audio system before connecting or disconnecting any cables to the

speaker – also if you intent to clean the surface or single components. Never use ammable

or combustible chemicals for cleaning audio components.

• HEDD studio monitors are equipped with universal mains, meaning that the speakers work

within a voltage range from 85–265V. This makes the usual voltage switches unnecessary.

• Do not place this unit on an unstable cart, stand or tripod, bracket or table. The unit may fall,

causing serious injury and/or serious damage.

• This product should never be used outside. Avoid exposing it to rain or any sort of moisture.

• Power chords and audio cables connected to this product should never be stepped on.

• Please note that defective cables can harm your speakers and / or create humming, crackling,

etc.

• Always keep electric equipment out of the reach of children.

• Always unplug sensitive electronic equipment during lightning storms.

• The monitor should be installed near the socket outlet and disconnection of the device should

be easily accessible.

• To completely disconnect the speaker from the AC mains, physically disconnect the power

chord.

• Please try to avoid touching the speaker diaphragms. Always keep the woofer’s ventilation

ports open.

• Don't use the speaker at very high or low temperatures. The speakers’ back panel should not

be exposed to direct sunlight. Never operate this product in an explosive atmosphere.

• High SPL’s can irreparably damage your ears! Please take good care when working the

speakers at high levels.

• Loudspeaker diaphragms are embedded in strong magnetic elds. Magnetic objects (toys

etc.) should not be placed or played around with next to the speakers.

• Make sure that the air can circulate behind the speaker as it needs sucient cooling.

• Only mount this product onto dry and non-conducting walls (wood, plaster). For other wall

materials an additional isolation panel is required. To prevent injury, this loudspeaker must be

securely attached to the wall in accordance with the installation instructions of your wall

mount bracket.