MSDS

ManualsBrandsHedrix ManualsPaint11 oz. Match of 1B20-1 Peach Ice Low Lustre Custom Spray Paint (2-Pack)

MATERIAL SAFETY DATA SHEET

Date Printed: 7/25/2012

Page 1 of 4

28-XXXX ALL COLORS - AEROSOL

PRODUCT NAME: 28-XXXX ALL COLORS - AEROSOL HMIS CODES: H F R P

FORMULA KEY: STOCK-028-XXXXAER 2 3 0 I

================== SECTION I - MANUFACTURER IDENTIFICATION =================

MANUFACTURER'S NAME: Hedrix, LLC

ADDRESS : 222 S. Livingston Ave.

Livingston, NJ 07039

EMERGENCY PHONE : 1-800-255-3924 DATE PRINTED : 7/25/2012

INFORMATION PHONE : 1-973-863-2640 NAME OF PREPARER : Jason Shaw

========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========

VAPOR PRESSURE WEIGHT

REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT

-------------------------------------------------------------------------------------------------------------------------------

----------

ACETONE 67-64-1 181.7 20 C 45.20

OSHA PEL: 750 PPM

ACGIH TLV: 500 PPM

PROPANE 74-98-6 110 70 F 14.10

OSHA PEL: 1000 PPM

ACGIH TLV: 1000 PPM

MEDIUM AROMATIC PETROLEUM NAPTHA 64742-95-6 4.8 100 F 9.65

OSHA PEL/TWA IS 100 ppm

ACGIN TLV/TWA IS 100ppm

NORMAL BUTANE 106-97-8 17 70 F 6.65

OSHA PEL: 800 PPM

ACGIH TLV: 800 PPM

SOLVENT NAPTHA 8032-32-4 26 100 F 4.35

OSHA PEL/TWA: 300 ppm

ACGIH TLV/TWA 300 ppm

1-METHOXY 2-PROPYL ACETATE 108-65-6 4.9 20 DEG C 1.95

ACGIH (THV) : NOT ESTABLISHED

ONTARIO : 50 PPM TWA

* EB ETHYLENE GLYCOL BUTYL ETHER 111-76-2 88 25 DEG C 1.30

OSHA PEL: 50 PPM HAP's - NO

ACGIH: 20PPM

* XYLOL 1330-20-7 8 68 DEG F 1.10

OSHA PEL/TWA IS 100PPM

ACGIH TLV/TWA IS 100 PPM

ACGIH TLV/STEL IS 100 PPM

GLYCOL ETHER PM 107-98-2 88 25 DEG C .60

OSHA PEL: 50 PPM

## BLACK 1333-86-4 3 68 F .55

BLACK PIGMENT IS A SOLID NOT A LIQUID.

OSHA PEL 3.5mg/m3

ACGIH TLV 3.5mg/m3

* ## ETHYL BENZENE 100-41-4 7.1 20 DEG C .30

OSHA PEL: 100 PPM

ACGIH TLV: 125 PPM

>>>>>>>>>>>>>>>>> A E R O S O L C A N <<<<<<<<<<<<<<

This Aerosol Product should not be stored above 120° F. Do Not puncture. Keep from sparks and open flame. Containers may

explode when exposed to extreme heat. Do Not apply to hot surfaces.

Summary of content (4 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Date Printed: 7/25/2012 28-XXXX ALL COLORS - AEROSOL Page 1 of 4 PRODUCT NAME: 28-XXXX ALL COLORS - AEROSOL FORMULA KEY: STOCK-028-XXXXAER ================== SECTION I - HMIS CODES: H F R P 2 3 0 I MANUFACTURER IDENTIFICATION ================= MANUFACTURER'S NAME: Hedrix, LLC ADDRESS : 222 S. Livingston Ave.
PAGE 2
MATERIAL SAFETY DATA SHEET Date Printed: 7/25/2012 28-XXXX ALL COLORS - AEROSOL =============== SECTION III Page 2 of 4 - PHYSICAL/CHEMICAL CHARACTERISTICS BOILING RANGE: -43 F - 350 DEG. F VAPOR DENSITY: HEAVIER THAN AIR COATING V.O.C.: 4.23 lb/gl ============ WEIGHT PER GALLON: 6.16 lb/gl EVAPORATION RATE: SLOWER THAN ETHER MATERIAL V.O.C.: 2.
PAGE 3
MATERIAL SAFETY DATA SHEET Date Printed: 7/25/2012 28-XXXX ALL COLORS - AEROSOL Page 3 of 4 MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Not applicable. EMERGENCY AND FIRST AID PROCEDURES: INGESTION: If swallowed, do not induce vomiting. water for at least 15 minutes. EYES: In case of eye contact, flush eyes immediately with plenty of SKIN: Wash effected area throughly with soap and water. INHALATION: If affected, remove from exposure. Restore breathing. Keep warm and quiet.
PAGE 4
MATERIAL SAFETY DATA SHEET 28-XXXX ALL COLORS - AEROSOL Date Printed: 7/25/2012 Page 4 of 4 The information and recommendations contained herein are believed to be accurate at the time of preparation or obtained from sources believed to be generally reliable. Fasse Paint Co. will not be held liable for claims relating to any party's use of or reliance on information contained herein, regardless of whether it is claimed the information is inaccurate.