MSDS

MATERIAL SAFETY DATA SHEET
Date Printed: 7/25/2012
Page 2 of 4
28-XXXX ALL COLORS - AEROSOL
=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============
BOILING RANGE: -43 F - 350 DEG. F WEIGHT PER GALLON: 6.16 lb/gl
VAPOR DENSITY: HEAVIER THAN AIR EVAPORATION RATE: SLOWER THAN ETHER
COATING V.O.C.: 4.23 lb/gl MATERIAL V.O.C.: 2.463 lb/gl
(WITHOUT EXEMPT SOLVENTS) (WITH EXEMPT SOLVENTS)
APPEARANCE AND ODOR:
Viscous liquid with an odor characteristic of the solvents listed in Section II.
================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============
FLASH POINT: -156 F METHOD USED:
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: .8 UPPER: 13.1
EXTINGUISHING MEDIA:
Carbon Dioxide, Dry Chemical, Alcohol Foam. Use an extinguishing agent suitable for the surrounding fire.
SPECIAL FIREFIGHTING PROCEDURES:
Water spray may be ineffective. Water spray may be used to cool closed containers to prevent pressure build-up and
possible autoignition or explosion when exposed to extreme heat. If water is used, fog nozzles are preferrable. Fire-
fighters should wear self contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Keep container tightly closed. Isolate from heat, electrical equipment, sparks, and open flames. Closed containers may
explode when exposed to extreme heat. Do not apply on hot surfaces. Do not weld on or near container. Toxic gases may
form when product is contacted by flame or hot surfaces.
======================== SECTION V - REACTIVITY DATA =======================
STABILITY:
Stable at normal temperatures.
CONDITIONS TO AVOID:
Do not allow the can to exceed 120° F.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS:
May produce hazardous decomposition products when heated. Welding, brazing, or flame-cutting on surfaces coated with
this product may produce fumes including: Carbon Monoxide or Carbon Dioxide.
HAZARDOUS POLYMERIZATION:
Not expected to occur.
==================== SECTION VI - HEALTH HAZARD DATA =======================
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Vapor and spray mist may be harmful if inhaled. Vapor irritates eyes, nose, and throat. Repeated exposure to high vapor
concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage.
Intentional misuse by deliberately inhaling the contents can be harmful or fatal.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Eye contact: causes eye irritation. May experience itching, burning sensation and visual disturbances.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
May cause moderate skin irritation. May be harmful if absorbed through the skin. Dryness, itching, cracking, burning,
redness, and swelling are conditions associated with excessive skin contact.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Harmful or fatal if swallowed.
HEALTH HAZARDS (ACUTE AND CHRONIC):
Avoid long term and repeated contact.