User's Manual

9
1) Connect the DVI-D signal cable to the signal port of the Graphic Card in your computer.
2) Connect the D-sub signal cable to the signal port of the Graphic Card in your computer.
3) Connect the DC input cable to the DC input port on the rear side of the monitor
4) Connect the RCA,S-video cable to the video system like a DVD
5) Turn on the monitor with the power switch of the user control port.
The adoption of the new VESA Plug & Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible
system without the usual manual hassles and confusion. Your PC system can easily
identify and configure itself for use with your display. This monitor automatically
tells the PC system its Extended Display Identification Data(EDID) using
Display Data Channel(DDC) protocols so the PC system can automatically configure
itself to use the flat panel display.
All LCD monitors need time to become thermally stable whenever you turn on the monitor
After letting the monitor be turned off for a couple of hours.
Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to be
Warmed up for at least 20 minutes before making any screen adjustments.
Warm-up Time
Connecting the LCD Monitor
Setting up the LCD Monitor
Plug & Play