Operation Manual

HEIDENHAIN CNC PILOT 4290 167
4.8 Attributes for Contour Description
Additive compensation G149-Geo
G149 followed by a D number activates/deactivates an additive
compensation function. The CNC PILOT manages the 16 tool-
independent compensation values in the setup parameter10.
Parameters
D Additive compensation (default: D900)
 D=900: Deactivates the additive compensation
 D=901 to 916: Activates the additive compensation D
 Note the direction of contour description.
 Additive compensation is effective from the block in
which G149 is programmed.
 Additive compensation remains in effect until:
 the next G149 D900,
 up to the end of the finished part description.