Operation Manual

206
4.18 Safety Clearances
4.18 Safety Clearances
Safety clearance G47
G47 defines the safety clearance for
 the turning cycles: G810, G820, G830, G835, G860, G869, G890.
 the drilling cycles G71, G72, G74.
 the milling cycles G840...G846.
G47 without parameters activates the parameter values (machining
parameters 2, ... – safety clearances).
Safety clearance G147
G147 defines the safety clearance for
 the milling cycles G840...G846.
 the drilling cycles G71, G72, G74.
Parameters
P Safety clearance
G47 replaces the safety clearance set in the machining
parameters or that set in G147.
Parameters
I Safety clearance to the milling plane (only for milling
operations)
K Safety clearance in approach direction (feed)
G147 replaces the safety clearance set in the parameters
(machining parameters 2, ...) or that set in G47.