Operation Manual

256
4.25 Front/Rear-Face Machining
Linear segment on front/rear face G101
G101 moves the tool on a linear path at the feed rate to the “end
point.”
Example: G101
. . .
N1 T7 G197 S1200 G195 F0.2 M104
N2 M14
N3 G110 C0
N4 G0 X110 Z2
N5 G100 XK50 YK0
N6 G1 Z-5
N7 G42 Q1
N8 G101 XK40 [linear path on front face]
N9 G101 YK30
N10 G103 XK30 YK40 R10
N11 G101 XK-30
N12 G103 XK-40 YK30 R10
N13 G101 YK-30
N14 G103 XK-30 YK-40 R10
N15 G101 XK30
N16 G103 XK40 YK-30 R10
N17 G101 YK0
N18 G100 XK110 G40
N19 G0 X120 Z50
N20 M15
. . .
Parameters
X End point (diameter)
C End angle—for angle direction, see help graphic
XK End point (Cartesian)
YK End point (Cartesian)
Z End point (default: current Z position)
Programming:
 X, C, XK, YK, Z: Absolute, incremental or modal
 Program either X–C or XK–YK