Operation Manual

258

4.26 Lateral Surface Machining

Rapid traverse, lateral surface G110

G110 moves at rapid traverse along the shortest path to the end point.

G110 is recommneded for positioning the C axis to a defined angle

(programming: N.. G110 C...).

Example: G110

. . .

N1 T8 G197 S1200 G195 F0.2 M104

N2 M14

N3 G120 X100

N4 G110 C0 [rapid, lateral surface]

N5 G0 X110 Z5

N6 G110 Z-20 CY0

N7 G111 Z-40

N8 G113 CY39.2699 K-40 J19.635

N9 G111 Z-20

N10 G113 CY0 K-20 J19.635

N11 M15

. . .

Parameters

Z End point

C End angle

CY End point as linear value (referenced to unrolled reference

diameter G120)

X End point (diameter)

Programming:

 Z, C, CY: Absolute, incremental, or modal

 Program either Z–C or Z–CY