Operation Manual

HEIDENHAIN CNC PILOT 4290 317
4.34 Programming with Variables
#787 Reference diameter for lateral surface machining
(G120)
#788 Spindle holding the workpiece (G98)
#790 Oversize G52-Geo
 0: Do not include
 1: Include
#791..#792 G57 oversizes X, Z
#793 G58 oversize P
#794..#795 Cutting width in X and Z by which the tool reference
point is shifted with G150/G151
#796 Number of spindle for which the last feed rate was
programmed
#797 Number of spindle for which the last speed was
programmed
#801 Tilted plane is active
#802  0: G30 not active
 1: G30 active
#803 Number of the selected language, based on the
sequence of languages specified in control parameter
4 (starting with 0)
#804 Is DataPilot?
 0: Control
 1: DataPilot
NC information in # variables
Tool information in # variables
#512 Tool type (3-digit number)
#513..#515 1., 2., 3. position of tool type
#516 Usable length (nl) for turning, drilling or boring tools:
#517 Main working direction:
 0: Undefined
 1: +Z
 2: +X
 3: –Z
 4: –X
 5: +/–Z
 6: +/–X
#518 Secondary machining direction of turning tools
#519 Depending on the tool type:
 14*: 1 = right, 2 = left execution (A)
 5**, 6**: Number of teeth