Operation Manual

HEIDENHAIN CNC PILOT 4290 373
5.1 Simulation Mode of Operation
Simulation mode
You can set by soft key whether the simulation will be run
continuously or blockwise.
U Single block: Stop after every NC source block
U Basic block
 Contour simulation: Stop after every contour
element
 Machining or motion simulation: Stop after every
traverse path
U Without stop (single block and basic block soft keys
are not pressed): The simulation is conducted without
stop.
U Menu item “Stop”: The simulation stops.
U Menu item “Continue”: The simulation resumes.
During a simulation stop you can switch the block mode, edit the
settings or call the dimensioning function.