Operation Manual

454
6.9 Help Functions
Calculator
You can use an online pocket calculator for example for standard
calculations, calculation of fit tolerances, and calculation of the core
hole diameter for inside threads.
Calculate:
U Position the cursor on the input field of the dialog box
U Call the calculator. The value of the input box is
loaded.
U Perform the calculation.
U “OK” closes the calculator and applies the values.
U “Cancel” closes the calculator without applying the values.
Operation:
 Select and activate the function/box by cursor key or mouse.
 The arithmetical functions (SIN, Square, etc.) refer to the value
displayed.
Displays:
 Value displayed (below “=”)
 Saved value (to the right of “=”)
 Arithmetic operation and subtotal (to the right of the value displayed)
Calculate fit (calculates the mean tolerance for fits)
U Enter the nominal diameter.
U Press “Fit.”
U Enter the data of the fit (“Fit” dialog box).
U Press “OK.” The calculator displays the mean tolerance value.
Calculate core hole diameter for inside threads (the diameter is
derived from the thread data):
U Press “Inside thread.”
U Enter the thread data (“Inside thread” dialog box).
U Press “OK.” The calculator calculates the core hole diameter and
accepts it as display value.
Calculator functions
= Perform calculation; display result
+,-,*,/ Basic operations
SIN, COS,
TAN
Trigonometric functions
ASIN,
ACOS,
ATAN
Inverse trigonometry functions
X² Square
÷ Square root
STO Store value displayed
STO+ Add value displayed to memory
contents
STO– Subtract value displayed from memory
contents
RCL Recall memory contents to the display
CLR Clear display
1/X Calculate the reciprocal of the value
displayed
p Ratio of circle circumference to
diameter (3.14159)
n % Percent calculation