Operation Manual

HEIDENHAIN CNC PILOT 4290 473
6.12 Assigning Attributes
Attributes – Additive compensation
With this attribute, you can assign an additive compensation value to
the entire contour, a contour section or individual contour elements.
The CNC PILOT manages 16 tool-independent additive compensation
values. In the attribute, you enter the number of the additive
compensation value. The compensation value is defined by
parameter.
Assign the additive compensation:
U Select “Attribute > Feed/Peak-to-valley > Additive compensation”
in the finished part menu.
U Select the entire contour, a contour section or individual contour
elements (see “Selections” on page 448).
U TURN PLUS opens the “Additive compensation” dialog box.
U Define the number of the additive compensation.
Machining attributes – Measure
The machining attribute integrates the expert program entered in
machining parameter 21 (“SP-MEAS01”). You use it to organize a
measuring cut after every nth workpiece.
Assign the “Measure” machining attribute:
U Select “Attribute > Machining attribute > Measure” in the finished
part menu.
U Select the contour element. TURN PLUS opens the “Measuring
cut” dialog box.
U Enter the parameters of the expert program.
Parameters
D9xx Offset, number of the additive compensation value
(1 to 16)
Parameters
I Oversize for measuring cut
K Length of measuring cut
Q Measuring loop counter, every nth workpiece is measured