Operation Manual

490
6.13 Preparing a Machining Process
Parameters for face drivers with jaws (“Three-
jaw chuck indirect”)
Setting up and managing tool lists
In TURN PLUS, you can define and manage turret assignments as
described on the next few pages.
View the turret assignment:
U Select “Setting up > Tool list > Tool life management.”
U TURN PLUS opens the active tool list.
Parameters
ID number chuck
Type of jaw
ID number jaw
ID of face driver
Indentation depth
Approximate depth to which the grippers press into the material.
TURN PLUS uses this value to position the face driver graphics.
Clamping pressure
The entry is transferred to the program head. TURN PLUS does not
evaluate this parameter.
 Load TURN PLUS-specific turret assignments before
using the IWG/AWG function for selecting tools.
 In the machining parameter 2 “Global technology
parameters,” you define the tools to be used by the
IWG/AWG.